- Max. film speed 120 m/min (395 feet/min)
- Max. roll changes 4/min
The RW series is designed especially for medium and heavy gauge film, nonwoven and similar. The RW winder can be set up in-line with an extruder or out-of-line with an unwinder.
Web cut is done in stop position, which means that the web will be cut at a right angle to the edge of the web with a clear cut, even on heavy gauge application.
Winding on cores or coreless. The cores require no tape or similar pre-gluing.
RW 1600 | RW 2000 | RW 2200 | RW 3200 | |
Film thickness | From 10 microns to 4 x 300 microns | From 10 microns to 4 x 300 microns | From 10 microns to 4 x 300 microns | From 20 microns to 4 x 300 microns |
Min. winding width | 500 mm 19,7 in | 500 mm 19,7 in | 1000 mm 39,4 in | 1600 mm 63 in |
Max. winding width | 1600 mm 63,0 in | 2000 mm 78,7 in | 2200 mm 86,6 in | 3200 mm 126 in |
Max. film speed | 120 m/min 395 ft/min | 120 m/min 395 ft/min | 120 m/min 395 ft/min | 120 m/min 395 ft/min |
Max. roll changes | 4/min | 4/min | 4/min | 4/min |
Max. roll diameter | 300 mm 11,8 in | 300 mm 11,8 in | 500 mm 19,6 in | 500 mm 19,6 in |
Cores | With or without cores | With or without cores | With or without cores | With cores |
Number of lanes | 1 | 1 | 1 | 1 |